Table of Contents
Advertisement
network connection and setup
CONNECTING THE NETWORK ENCODER TO A
BROADBAND ROUTER WITH THE PPPoE/CABLE MODEM
This is for a small network environment such as homes, SOHO and ordinary shops.
Network Encoder
Network Encoder
Local PC
Configuring the network settings of the local PC connected to a
broadband router
Configuring the network settings of the local PC connected to a broadband router, follow
the instructions below.
Select : <Network Neighborhood>
<Properties>
<Obtain an IP address automatically> or <Use the following IP address>.
Follow the instructions below if you select <Use the following IP address>:
ex1) If the address (LAN IP) of the Broadband router is 192.168.1.1
IP address : 192.168.1.100
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.1.1
ex2) If the address (LAN IP) of the Broadband router is 192.168.0.1
IP address : 192.168.0.100
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.0.1
ex3) If the address (LAN IP) of the Broadband router is 192.168.xxx.1
IP address : 192.168.xxx.100
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.xxx.1
M
For the address of the Broadband router, refer to the product's documentation.
Refer to the "Port Range Forward (Port Mapping) Setup" section of the Broadband router's
documentation. (Page 30)
24_ network connection and setup
PPPoE or
Broadband
Cable Modem
router
<Properties>
<General>
<Internet Protocol (TCP/IP)>
INTERNET
PPPoE or
Cable Modem
DDNS Server
(Data Center, KOREA)
<Local Area Connection>
External Remote
PC
<Properties>
Advertisement
Table of Contents
