Table of Contents
Advertisement
network connection and setup
PORT RANGE FORWARD (PORT MAPPING) SETUP
If you have installed a broadband router with a network encoder connected, you must set the
port range forwarding on the Broadband router so that a remote PC can access the network
encoder in it.
Manual Port Range Forwarding
1.
From the Setup menu of the Broad-
band router, select <Applications &
Gaming> - <Port Range Forward>.
For setting the port range forward for
a third-party Broadband router, refer
to the user guide of that Broadband
router.
2.
Select <TCP> and <UDP Port> for
each connected network encoder to
the Broadband router.
Each port number for the Broadband
router should match that specifi ed in
<Network> - <Port> from the network
encoder's Setup menu.
3.
When done, click [Save Settings].
Your settings will be saved.
M
Above sample instructions are based on the CISCO's Broadband router (Model: LINKSYS).
The settings may differ depending on the connected Broadband router model.
For more information, refer to the user manual of the applicable router.
30_ network connection and setup
Advertisement
Table of Contents
