Table of Contents
Advertisement
IP filtering
You can create a list of IPs that you want to grant or deny access to them.
1.
From the Setup menu, select the
<Network (
)> tab.
2.
Click <IP fi ltering>.
3.
Select a <Filtering type>.
Deny : If selecting this, access from
those IPs that are added to the
fi ltering will be restricted.
Allow : If selecting this, access from
only those IPs that are added to the
fi ltering will be accepted.
4.
Provide the IP that you want to grant or
deny access from.
For IPv4, the default IP address is
0.0.0.0, and the default prefi x is 32.
5.
Select desired IP address to be approved or rejected from the entered IP addresses.
Only the selected IPs are fi ltered out.
6.
When done, click [Apply (
SSL
You can select a secure connection system or install the public certificate for this purpose.
1.
From the Setup menu, select the
<Network (
)> tab.
2.
Click <SSL>.
3.
Select a secure connection system.
To access the network encoder using HTTPS
mode, you have to type the IP address
for the network encoder in the form of
"https://<Network encoder_IP>".
4.
Search for the public certifi cate that you want to install on the network encoder.
To install the certifi cate on the network encoder, you need to provide a certifi cate
name (it can be arbitrarily assigned by the user), certifi cate fi le issued from the
certifi cation authority and a key fi le.
The <HTTPS(Secure connection mode using the public certifi cate)> item will be active only if
there exists a public certifi cate installed.
5.
When done, click [Apply (
)].
)].
English _51
Advertisement
Table of Contents
