Call Waiting Tone; Off-Hook Call Announcement (Ohca) - Panasonic KX-TDA100 Features Manual

Hybrid ip-pbx

Hide thumbs Also See for KX-TDA100:

Table of Contents

extension will be kept waiting until the called extension becomes available. Even while waiting, the

calling extension will hear a ringback tone.

If none of these methods of receiving notification (call waiting tone, OHCA, or Whisper OHCA) is set at

the called party, the caller will hear a reorder tone after trying to send a call waiting notification.

Feature References

1.1.3.3 Call Waiting

Operation References

1.2.4 When the Dialed Line is Busy or There is No Answer

Call Waiting Tone

When an extension user attempts to call a busy extension (i.e., an extension that is ringing or having a

conversation), a call waiting tone can be sent to the called extension to indicate another call is waiting.

This feature functions only if the called extension has activated call waiting. If it is activated, the calling

extension will hear a ringback tone.

One of two call waiting tones can be selected (Tone 1 or Tone 2) through personal programming (Call

Waiting Tone Type Selection).

Operation References

3.1.2 Settings on the Programming Mode

An extension user can talk with a busy extension through the built-in speaker and microphone of the called

party's proprietary telephone (PT). If the existing call is using a handset, a second conversation is made

using the speakerphone and microphone so that the called extension can talk to both parties.

Class of Service (COS) programming determines which extensions can use this feature.

This feature is available when the called extension uses one of the following telephones:

KX-T7625, KX-T7630, KX-T7633, KX-T7636

Off-hook Call Announcement (OHCA) cannot be used when

1.7 Busy Line/Busy Party Features

Feature Guide

Show Quick Links

Table of Contents