Programming Guide References
4.7.1 Slot [1-1]
Feature Guide References
None
4.7.6
Slot [1-1] PRI Card Property
The properties of the PRI card can be specified.
ISDN CO / QSIG Master / QSIG Slave—T200
Specifies the maximum time the PBX waits for a reply after sending the L2 command to ISDN.
Default
10 × 100 ms
Value Range
0–600 × 100 ms
Programming Guide References
4.7.1 Slot [1-1]
Feature Guide References
None
ISDN CO / QSIG Master / QSIG Slave—T202
Specifies the maximum time the PBX waits for a reply after resending the TIE demanding to ISDN.
Default
20 × 100 ms
Value Range
0–600 × 100 ms
Programming Guide References
4.7.1 Slot [1-1]
Feature Guide References
None
ISDN CO / QSIG Master / QSIG Slave—T203
Specifies the length of time to detect no communication status of L2.
4.7 Configuration [1]
Feature Guide
359