Panasonic KX-TDA100 Features Manual page 339

Q How do I set a 3-digit numbering plan?
A • There are 2 methods of creating a 3-digit numbering plan, using the System—
Numbering Plan—Extension screen (see "4.8.10 Numbering Plan—Extension [2-6-
1]"):
1.
Set the leading number to be 2 digits, with one additional digit. This method allows
a maximum of 10 extensions.
Example: Leading Number = 10; Additional Digits = x
In this example, extension numbers 100 to 109 can be used.
2.
Set the leading number to be one digit, with 2 additional digits. This method allows
a maximum of 100 extensions.
Example: Leading Number = 1; Additional Digits = xx
In this example, extension numbers 100 to 199 can be used.
For more details, see What is the procedure to modify the Numbering Plan?.
Q What is the procedure to modify the Numbering Plan?
A • Perform the following steps:
1.
Confirm that the Numbering Plan you will change is not currently being used by any
extensions (see "4.4.3 Tool—Extension List View").
If it is being used by extensions, temporarily change the number of those extensions
to that of another numbering plan, or delete the extension number (see "4.10.1
Wired Extension—Extension Settings [4-1-1]" and "4.10.9 Portable Station—
Extension Settings [4-2-1]").
2.
Clear the Leading Number cell.
3.
Click Apply.
4.
Modify the Additional Digits cell as required.
5.
Click Apply.
6.
Enter the desired value in the Leading Number cell.
7.
Click Apply.
8.
Set all extension ports to OUS status, and then back to INS status.
Q When modifying the Numbering Plan, I cannot change the Leading Number.
A • It is not possible to use the same Leading Number for 2 extension blocks, or to use a
number that could possibly overlap with another Leading Number.
So, for example, if "2" is already set as a Leading Number it is not possible to set "21" as
another Leading Number because of the possible overlap of extension numbers.
The number you are trying to store cannot be used if it is already being used by:
• A feature number
• Another extension block
• A Dial setting (see "4.15.1 TIE Table [9-1]")
• Quick Dialing (see "4.8.13 Numbering Plan—Quick Dialing [2-6-4]")
In any of these cases, choose another number.
Q When modifying the Numbering Plan, how do I set a 1-digit extension number?
4.6 Help
Feature Guide 339