Panasonic KX-TDA100 Features Manual page 340

4.6 Help
A • Perform the following steps:
1.
Clear the Leading Number cell.
2.
Click Apply.
3.
Set Additional Digits to "None".
4.
Click Apply.
5.
Enter the desired value in the Leading Number cell.
6.
Click Apply.
7.
Set all extension ports to OUS status, and then back to INS status.
Q How do I change a feature number?
A • Perform the following steps:
1.
Open the System—Numbering Plan—Feature screen (see "4.8.11 Numbering
Plan—Feature [2-6-2]").
2.
Change the value in the Dial cell of the desired feature.
3.
Click Apply.
Q I cannot change a feature number.
A • It is not possible to use the same number for 2 items.
The number you are trying to store cannot be used if it is already being used by:
• A feature number
• An extension
• A Dial setting (see "4.15.1 TIE Table [9-1]")
• Quick Dialing (see "4.8.13 Numbering Plan—Quick Dialing [2-6-4]")
In any of these cases, choose another number.
Q How do I change the code used to access another PBX?
A • Perform the following steps:
1.
Open the System—Numbering Plan—Other PBX Extension screen (see "4.8.12
Numbering Plan—Other PBX Extension [2-6-3]").
2.
Change the value in the Dial cell of the desired feature.
3.
Click Apply.
Q I cannot change an Other PBX Extension code.
A • It is not possible to use the same number for 2 items.
The number you are trying to store cannot be used if it is already being used by:
• A feature number
• An extension
• A Dial setting (see "4.15.1 TIE Table [9-1]")
• Quick Dialing (see "4.8.13 Numbering Plan—Quick Dialing [2-6-4]")
In any of these cases, choose another number.
I cannot change a feature number on the B/NA DND Call Feature screen.
Q
A • The number you are trying to store is already being used by another call feature.
Please choose a different number.
340 Feature Guide