Epson StylusPro 10000 Service Manual page 284

EPSON Stylus Pro 10000/10000CF
o
Are 2 waste ink tubes fixed to the tube clamp?
Tube
o
Are there the damage and ink leakage of 2 waste ink tubes?
o
Is there ink leakage (overflow) from the waste ink tank?
2. Ink system device
2.1 Dot missing detector / Cleaning unit : The carriage locking is canceled and the carriage
migrate to the left side, then confirm these units. Wipe the ink dirt. (Refer to 4.2.3.12)
o
Is there ink dirt in the window and also periphery department of the dot missing
detector?
Maintenance
Clamp
Figure 6-10.
o
Is there ink dirt in the bottom of the cleaning unit (the absorption material
attachment department)?
Dot missing detector
o
Is not the piece of paper etc. adhering to the cap ink pad and also 3 caps (grey
rubber)?
Cap
o
Is there the dirt of paper powder etc. in 3 sheets of vacuum cleaner heads of the
cleaning units?
*Wipe the dirt of the cleaning unit with the cloth that do not occur fuzz or paper.
Maintenance inspection items
Cleaning unit
Figure 6-11.
Cleaner head
Cap ink pad
Figure 6-12.
Revision A
284