Epson StylusPro 10000 Service Manual page 152

EPSON Stylus Pro 10000/10000CF
4. Remove the two screws (CP(W):M3x6) securing the carriage cover and remove the
carriage cover.
(Left side view)
Carridge cover
5. Sticking the nut that is jointed to the pipe on the tube pipe fixed plate with the gum tape
etc. to avoids missing the pipe.
Disassembly & assembly
(Right side view)
Screw
Figure 4-83.
Fix with the gum tape
Figure 4-84.
6. Loosening the nut on the side of the tube, while holding down the nut part, such that
the nut on the side of the metal pipe that fixed it with the tape does not get loose we
remove the pipe.
When loosen the nut, do the measure so as not to get dirty with the rag
etc. because there is the possibility that the remaining ink leaks from
metal pipe side and tube side.
Disassembly Flow
Figure 4-85.
Revision A
152