Removing The P_Thick Sensor - Epson StylusPro 10000 Service Manual

EPSON Stylus Pro 10000/10000CF

4.2.3.26 Removing the P_THICK Sensor

1. Remove the H Top Cover as described in "H Top Cover Removal 123.
2. Push the paper hold lever to the front. (Unlock condition)
Figure 4-172.
3. Marking the P_THICK sensor bracket position on the CR guide rail.
P_THICK sensor
CR guide rail
Figure 4-173.
Disassembly & assembly
Paper hold lever
Marking
4. Remove two screws (M3x6) fixing the P_THICK sensor.
P_THICK sensor
5. Disconnect the cable connector from the P_THICK Sensor.
Disassembly Flow
Screw
Figure 4-174.
Cable connector
Figure 4-175.
Revision A
185