Epson StylusPro 10000 Service Manual page 168

EPSON Stylus Pro 10000/10000CF
4. Disconnect the cable connector connected to CN10 on the CSIC board.
Figure 4-126.
5. Pull out three waste ink tubes from tube.
Waste ink tube
Figure 4-127.
Disassembly & assembly
6. Lift up the ink pump ASSY to release the carriage lock, and move the carriage away
from the home position.
CSIC board
CN10
7. Hold the Cleaning Unit with your hand then remove two screws (
securing Cleaning Unit to the CR guide rail.
CR Guide rail
Tube
Disassembly Flow
Figure 4-128.
Cleaning Unit
Bracket
Cap motor
Screw
Figure 4-129.
Revision A
:M4x8)
168