Table of Contents
Advertisement
2. Select a value in the DSCP In column.
3. Define the Queue fields.
4. Click Apply Changes. The DSCP is not overwritten, and the value is assigned a forwarding queue.
Assigning DSCP Values Using the CLI Commands
The following table summarizes the equivalent CLI commands for configuring fields in the DSCP Mapping page.
CLI Command
qos map dscp-queue dscp-list to queue-id
The following is an example of the CLI commands:
Console (config)# qos map dscp-queue 33 40 41 to 1
Mapping TCP Port Values to Queues
The TCP to Queue page allows network managers to classify specific TCP destination port traffic to queues. To open the TCP to Queue page:
Select Quality of Service >Mapping to Queue > TCP to Queue in the Tree View. The TCP to Queue page opens.
l
TCP to Queue Page
Description
Modifies the DSCP to queue mapping.
Advertisement
Table of Contents
