Table of Contents
Advertisement
The following is an example of the CLI commands:
Console (config)# mac access-list dell
Console (config-mac-al)# permit 6.6.6.6.6.6 0.0.0.0.0.0 any vlan 4
Console (config-mac-al)# deny 6.6.6.6.6.6 0.0.255.255.255.255
Binding ACLs
The ACL Bindings page allows network managers to assign ACL Lists to interfaces. To open the ACL Bindings page:
Select Switch > Network Security > ACL Bindings. The ACL Bindings page opens.
l
NOTE:
ACLs have no effect unless attached to an interface.
ACL Bindings Page
The ACL Bindings page contains the following fields:
Select an Interface—Indicates the interface and interface type to which the ACL is attached. The possible field values are:
l
Port—Indicates the port number to which the ACL is attached.
¡
LAG—Indicates the LAG to which the ACL is attached.
¡
VLAN—Indicates the VLAN to which the ACL is attached.
¡
Bind Interface to ACL—Indicates the ACL name to which incoming packets are matched. Packets can be matched to either IP-based ACLs or MAC
l
Address based ACLs. The possible field values are:
Advertisement
Table of Contents
