Mapping CoS Values to Queues
The CoS to Queue page contains fields for classifying CoS settings to traffic queues. To open the
CoS to Queue page, click Quality of Service→ QoS Mapping→ CoS to Queue in the tree view.
Figure 9-3. CoS to Queue
The CoS to Queue page contains the following fields:
Class of Service — Specifies the CoS priority tag values, where zero is the lowest and 7 is the
highest.
Queue — The queue to which the CoS priority is mapped. Four traffic priority queues are
supported.
Restore Defaults — Restores the device factory defaults for mapping CoS values to an egress
queue.
Mapping a CoS Value to a Queue
1
Open the CoS to Queue page.
2
Select a CoS entry.
3
Define the queue number in the Queue field.
4
Click Apply Changes.
The CoS value is mapped to an egress queue, and the device is updated.
Configuring Quality of Service
379