Displaying interface statistics for a port:
1. Open the Interface Statistics page.
2. Select Port in the Interface field.
3. Click Reset All Counters. The port interface statistics are displayed.
Displaying interface statistics for a LAG:
1. Open the Interface Statistics page.
2. Select LAG in the Interface field.
3. Click Reset All Counters. The LAG interface statistics are displayed.
Viewing Interface Statistics Using the CLI Commands
This section contains the CLI commands for viewing interface statistics.
CLI Command
show interfaces counters [ethernet interface | port-channel port-channel-number]
The following is an example of the CLI commands:
console# show interfaces counters ethernet 1/e1
Port InOctets InUcastPkts InMcastPkts InBcastPkts
---- ---------- ----------- ----------- -----------
1/e1 1717 0 326 26
Port OutOctets OutUcastPkts OutMcastPkts OutBcastPkts
--- ---------- ------------ ------------ ------------
1/e1 21845 0 326 26
Alignment Errors: 0
FCS Errors: 0
Single Collision Frames: 0
Description
Displays traffic seen by a physical interface.