Table of Contents
Advertisement
Interface Settings Page
The QoS Interface Settings page contains the following fields:
Interface—Indicates the specific interface to which the Trust mode is applied. The trust mode is applied to:
l
Port—Indicates the port number.
¡
LAG—Indicates the LAG number.
¡
VLAN—Indicates the VLAN number.
¡
Disable "Trust" Mode on Interface—Disables Trust values on the device. For more information about Trust settings, see
l
Settings".
Set Default CoS For Incoming Traffic To—Sets the default CoS tag value untagged packets. The CoS tag values are 0-7. The default value is 0.
l
Assigning QoS/CoS settings for an interface:
1. Open the QoS Interface Settings page.
2. Select an interface in the Interface field.
3. If trust mode is to be disabled on the specific interface, check the Disable "Trust" Mode on Interface check box.
4. Set Default CoS For Incoming Traffic to the required value.
5. Click Apply Changes. The QoS/CoS settings are assigned to the interface.
Assigning QoS/CoS Interfaces Using the CLI Commands
The following table summarizes the equivalent CLI commands for configuring fields in the QoS Interface Settings page.
CLI Command
Description
qos trust
Enables trust state for each.
"Configuring Global QoS
Advertisement
Table of Contents
