Table of Contents
Advertisement
System Health Page
The System Health page contains the following fields:
Unit—Indicates the stacking unit number.
l
Main Power Supply Status—Indicates the main power supply state. The possible field values are:
l
—Indicates the main power supply is operating normally for the specified unit.
¡
—Indicates the main power supply is not operating normally for the specified unit.
¡
Not Present—Indicates that the power supply is not present for the specified unit.
¡
Redundant Power Supply Status—Indicates the redundant power supply state. The possible field values are:
l
—Indicates the redundant power supply is operating normally for the specified unit
¡
—Indicates the redundant power supply is not operating normally for the specified unit.
¡
Not Present—Indicates that the power supply is not present for the specified unit.
¡
Viewing System Health Information Using the CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed in the System Health page.
CLI Command Description
show system Displays system information.
The following is an example of the CLI commands:
Advertisement
Table of Contents
