Table of Contents
Advertisement
Click Statistics/RMON > History Control in the Tree View. The RMON History Control page opens.
l
RMON History Control Page
The RMON History Control page contains the following information:
History Entry No.—Specifies the History Control Table entry.
l
Source Interface—Indicates the source from which the history samples were taken. The possible field values are:
l
Port—Indicates the history samples were taken from a port.
¡
LAG—Indicates the history samples were taken from a LAG.
¡
Owner—Indicates the RMON station or user that requested the RMON information.
l
Max Number of Samples to Keep—Indicates the number of samples to be saved. The default value is 50.
l
Current Number of Samples—Indicates the current number of samples taken.
l
Sampling Interval—Indicates in seconds the time that samplings are taken from the ports. The possible values are 1-3600 seconds. The default is
l
1800 seconds (30 minutes).
Remove—Removes the History Control Table entry.
l
Checked—Removes the History Control Table entry.
¡
Unchecked—Maintains the History Control Table entry.
¡
Adding a History Control Entry:
1. Open the RMON History Control page.
2. Click Add. The Add History Entry page opens
Advertisement
Table of Contents
