Table of Contents
Advertisement
Access Profiles Page
The Access Profiles page contains the following fields:
Access Profile State—Enables the Access Profile on the device. The possible field values are:
l
Enable—Enables Access Profile Security Management on the device.
¡
Disable—Disables the Access Profile Security Management on the device. If Access Profile Security Management is disabled, the device is
¡
accessible to all stations.
Access Profiles—Contains a list of user-defined Access Profile Lists. The Access Profile list contains the following default value:
l
Console Only—Enables access only via the console. Selecting Console only disconnects HTTP and Telnet sessions. This is the default value, and
¡
cannot be removed.
Current Active Access Profile —Displays the Access Profile that is currently active.
l
Set Access Profile Active—Activates the selected Access Profile.
l
Remove—Removes the selected Access Profile from the Access Profile Names.
l
Checked—Removes an Access Profile.
¡
Unchecked—Maintains an Access Profile.
¡
NOTE:
Active profiles cannot be removed.
Activating a Profile:
1. Open the Access Profiles page.
2. Select an Access Profile in the Access Profile field.
3. Check the Set Access Profile Active check box.
4. Click Apply Changes. The Access Profile is activated.
Adding an Access Profile:
Advertisement
Table of Contents
