Dell PowerConnect 3324 User Manual page 109

Show VLAN—Lists and displays specific VLAN information according to:
l
VLAN ID—Displays VLANs by VLAN ID. The default ID for the VLAN is 1. If the VLAN has an ID that is the current port Port Default VLAN ID (PVID),
¡
and the ID is deleted from the port, the port PVID is set to 1. VLAN number 1 cannot be deleted from the system. The VLAN range is 1-4095. VLAN
4095 is the Discard VLAN.
VLAN Name—Displays VLAN according to the VLAN name.
¡
VLAN Name—Displays or defines a user name for the VLAN.
l
Status—Indicates the VLAN type. VLANs are user-defined (permanent), created through GVRP, or are default VLANs. The possible field values are:
l
Dynamic—Indicates the VLAN was dynamic created through GVRP.
¡
Static—Indicates the VLAN is user-defined.
¡
Default—Indicates the VLAN is the default VLAN.
¡
Remove—Removes the VLAN from the VLAN Membership Table. The possible field values are:
l
Checked—Removes the VLAN group from the VLAN Membership Table.
¡
Unchecked—Maintains the VLAN group in the VLAN Membership Table.
¡
Adding new VLANs:
1. Open the VLAN Membership page.
2. Click Add. The Create New VLAN page opens:
Create New VLAN Page
3. Define the VLAN ID and VLAN Name fields.
4. Click Apply Changes. The new VLAN is added, and the device is updated.
Modifying VLAN Name Groups:
1. Open the VLAN Membership page.
2. Select a VLAN in the Show VLAN field.
3. Modify the VLAN Name field.
4. Click Apply Changes. The VLAN membership information is modified, and the device is updated.
Deleting a VLAN:
1. Open the VLAN Membership page.
2. Select a VLAN in the Show VLAN field.
3. Check the Remove check box.
4. Click Apply Changes. The VLAN is deleted, and the device is updated.
Defining VLAN Membership Groups Using CLI Commands
The following table summarizes the equivalent CLI commands for defining VLAN membership groups as displayed in the VLAN Membership page.
CLI Command Description
vlan database Enters the interface configuration (VLAN) mode.
vlan {vlan-range} Creates a VLAN.