•
Transmitted Broadcast Packets—Displays the amount of Broadcast packets
transmitted from the selected interface.
•
Transmitted Unknown Packets—Displays the amount of unknown packets
transmitted from the selected interface.
•
Transmitted Discarded Packets—Displays the amount of discarded packets from the
selected interface during transmission.
•
Transmitted Packets with Errors—Displays the amount of packets found to have
errors during transmission from the selected interface.
Displaying interface statistics for a port:
Open the Interface Statistics page.
1
Select Port in the Interface field.
2
Click Reset All Counters. The port interface statistics are displayed.
3
Displaying interface statistics for a LAG:
Open the Interface Statistics page.
1
Select LAG in the Interface field.
2
Click Reset All Counters. The LAG interface statistics are displayed.
3
Viewing Interface Statistics Using the CLI Commands
This section contains the CLI commands for viewing interface statistics.
CLI Command
show interfaces counters [ethernet
interface | port-channel port-
channel-number]
The following is an example of the CLI commands:
console# show interfaces counters ethernet 1/e1
PortInOctetsInUcastPktsInMcastPktsInBcastPkts
-----------------------------------------------
1/e11717032626
300
V i e w in g S t a t i st i c s
Description
Displays traffic seen by a physical
interface.