Site Requirements; Product Disposal - Nokia IP200 Series Installation Manual

1
Overview
Figure 4
indications they might display.
Table 4 Appliance Status LEDs (continued)
Indicator
Power or
Status
Critical
For information about the built-in Ethernet interface LEDs, see
Ethernet Ports"

Site Requirements

Before you install a Nokia IP200 appliance, ensure that your computer room
or wiring closet conforms to the environmental specifications listed in
Appendix A, "Technical Specifications."

Product Disposal

At the end of its useful life, your appliance and all peripherals included with
it, including power cords and cables, must be disposed of in accordance with
all applicable national, state, and local laws and regulations. These devices
contain materials and components that must be disposed of properly.
26
describes the status conditions for each of the LEDs for all
Color
None (off)
Blue
None (off)
Red
on page 21.
Nokia IP200 Series Security Platform Installation Guide
Description
Power off
Power on
Normal
One or more fans are defective.
or
No recognizable boot device with
a valid kernel found.
or
Kernel panic (followed in 20
seconds by CPU reset).
"Built-in