Installing A Flash-Memory Pc Card; Storing System Logs On The Flash-Memory Pc Card - Nokia IP200 Series Installation Manual

Installing a Flash-Memory PC Card

Caution
You risk damage to the appliance or loss of data if you do not use the
following procedure when you replace the flash-memory PC card.
Note
You can use only one of the slots at a time, and Nokia recommends that
you use only the top PC-card slot for optimum ESD protection.
To install the flash-memory PC card
1. Insert the flash-memory PC card into PC-card slot 1 or slot 2.
2. Press gently on the card until it is firmly seated in the slot.
Storing System Logs on the Flash-Memory PC
Card
You can use the flash-memory PC card to store system log messages. Use
Nokia Network Voyager to configure the flash-memory PC card as an
optional disk. After you reboot your Nokia IP200 appliance, use Network
Voyager to configure system logging options. For more information, see the
Nokia Network Voyager Reference Guide.
If you configure the flash-memory PC card as an optional disk, you must
perform one of the following procedures before you remove the
flash-memory PC card.
Nokia IP200 Series Security Platform Installation Guide
The eject button to the left of the slot should be flush with the card.
Installing a Flash-Memory PC Card
59