Starting The Boot-Manager Command-Line Interface - Nokia IP200 Series Installation Manual

Starting the Boot-Manager Command-Line
Interface
Use the following procedure to enter the boot manager and begin entering
commands.
To enter the boot manager
1. Connect to the appliance with a console connection.
2. Boot or reboot the system.
3. The following text might appear. If it does, enter 1.
4. Type any character when the following text appears:
5. To exit the boot manager and continue booting up, type
Nokia IP200 Series Security Platform Installation Guide
setalias—Set system alias. For more information, see
page 70.
unsetalias—Clear system alias. For more information, see
on page 70.
showalias—Show system aliases. For more information, see
on page 71.
netconfig—This command is for future use and is not yet supported.
Verifying DMI Pool Data
1 . . . Bootmgr
2 . . . IPSO
Type any character to enter command mode.
If you do not press a key, the system continues to boot after the bootwait
period expires.
The boot manager command prompt appears:
BOOTMGR[1]>

Starting the Boot-Manager Command-Line Interface

"setalias" on
"unsetalias"
"showalias"
.
boot
65