Input Source Selection (Component, Scart, Hdmi) - Sanyo PDG-DXL2000 Owner's Manual

Video Input

Input Source Selection (Component, Scart, HDMI)

Direct Operation
Choose Computer 1(Component) or Computer 1(Scart)
by pressing the the COMPONENT or COMPUTER 1 button
on the remote control; choose HDMI by pressing the HDMI
button on the remote control.
Before using these buttons, correct input source should be
selected through Menu operation as described below.
Menu Operation
1 Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
2
Use the Point
then press the Point
buttons to select Component or RGB(Scart) and then
press the SELECT button.
OR
Use the Point
press the SELECT button;
When the input source is coming from video
Component
equipment connected to the COMPUTER
IN 1/COMPONENT IN terminal with a
Component-VGA Cable, select Component.
When the input source is coming from video
RGB (Scart)
equipment connected to the COMPUTER
IN 1/COMPONENT IN terminal with a Scart-
VGA Cable, select RGB (Scart).
When the video signal is connected to the
HDMI
HDMI terminal, select HDMI.
Note:
When the Input Search function is set to On 1 or On 2 in
the Auto setup function, the input signal will be searched
automatically (p.51).
42
buttons to select Input and
or the SELECT button.
buttons to select Computer 1 and
button; use the Point
buttons to select HDMI, and then
Remote Control
COMPUTER 1 button
HDMI button
COMPONENT button
Input Menu
Computer 1 (RGB)
Computer 1 (Scart)
HDMI
Computer 1
(Component)