Computer Input; Input Source Selection (Computer 1: Rgb) - Sanyo PDG-DXL2000 Owner's Manual

Computer Input

Direct Operation
Choose Computer 1(RGB) by pressing the COMPUTER 1
button on the remote control.
Before using these buttons, correct input source should be
selected through Menu operation as described below.
Menu Operation
Press the MENU button to display the On-Screen
1
Menu. Use the Point
then press the Point
2 Use the Point
3 When Computer 1 is selected, press the Point
access the submenu items. Use the Point
to select the RGB input source and then press the
SELECT button.
Note:
When the Input Search function is set to On 1 or On 2 in
the Auto setup function, the input signal will be searched
automatically (p.51).
30

Input Source Selection (Computer 1: RGB)

buttons to select Input and
or the SELECT button.
buttons to select Computer 1.
Remote Control
Computer 1(RGB)
Computer 1(Scart)
Input Menu
to
buttons
Computer
1
COMPUTER 1 button