Remote Control Operation - Sanyo PDG-DXL2000 Owner's Manual

Basic Operation
Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons
enables you to make the desired operation quickly without calling up the On-Screen Menu.
COMPUTER 1, COMPUTER 2, HDMI buttons
VIDEO, S-VIDEO, COMPONENT buttons
Press the COMPUTER 1/2, HDMI, VIDEO, S-VIDEO and
COMPONENT buttons on the remote control to select the
input source. See pages 30-31, 41-42 for details.
FREEZE buton
Press the FREEZE button on the remote control to freeze
the picture on the screen and turn off the sound. To cancel
the Freeze function, press the FREEZE button again or
press any other button.
Fig.1 will appear on the Screen menu while the Freeze
function is working.
Note:
When use the MUTE button to release the Freeze function,
the mute function can not be operated at the same time.
INFO. button
Display the input source information: Input, H-sync freq.,
V-sync freq., Screen, Language, Lamp status, Lamp
counter, Power management, Key lock, PIN code lock,
Remote control and SERIAL NO.. (p.63)
D.ZOOM buttons
Press the D.ZOOM
enter to the D. zoom +/– mode. See page 39 for details.
LAMP button
Press the LAMP button on the remote control to select the
lamp mode for changing the brightness on the screen.
Normal ...... Normal brightness.
Eco ........... Lower brightness reduces the lamp power
consumption and extends the lamp life.
28

Remote Control Operation

Fig.1
buttons on the remote control to
Remote Control
COMPUTER 1/2
buttons
VIDEO
button
FREEZE
button
D.ZOOM
buttons
Note:
See the next page for the description of
other buttons.
HDMI
button
S-VIDEO
button
COMPONENT
button
INFO.
button
LAMP
button