Sanyo PDG-DXL2000 Owner's Manual page 40

Multimedia projector
Hide thumbs Also See for PDG-DXL2000:
Table of Contents

Advertisement

Computer Input
Keystone
This function is used to adjust keystone distortion of the
projected image. Use the Point
item you want to adjust.
Keystone
To correct keystone distortion, press the SELECT button.
Keystone appears on the screen. Use the Point
buttons to correct keystone distortion (p.26).
Store or Reset
To store or reset the keystone correction, press the Point
button.
Store ..... Keep the keystone correction even when the AC
power cord is unplugged.
Reset..... Release the keystone correction when the AC
power cord is unplugged.
Ceiling
When this function is set to On, the picture will be top/
bottom and left/right reversed. This function is used to
project the image from a ceiling-mounted projector.
Rear
When this function is set to On, the picture will be left/right
reversed. This function is used to project the image from
rear of the screen.
Colorboard
Press the Point
button at Colorboard, and then use the
Point
buttons to switch the desired item [Red, Blue,
Yellow, Green, Blackboard(Green)] and then press the
SELECT button.
At the time of simple projection on the colored wall, you can
get the close color image to the color image projected on a
white screen by selecting the similar color to the wall color
from the preset colors.
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
Yes. All adjustments will return to their previous figures.
40
buttons to choose the
Keystone
Ceiling
Rear

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents