Top Controls And Indicators - Sanyo PDG-DXL2000 Owner's Manual

Part Names and Functions
POWER indicator
– Turn red when the projector is in the stand-by
mode.
– Turn green while the projector is under operation
(pp.20, 74).
– Blink green in the Power management mode
(pp.57, 74)
WARNING TEMP. indicator
Emit a red light when the projector detects abnor-
mal condition. This also blinks red when the inter-
nal temperature of the projector exceeds the oper-
ating range (pp. 64, 74).
LAMP REPLACE indicator
Turn yellow when the life of the projection lamp
draws to an end (pp. 67, 74).
3D indicator
Turn blue when the projector is in 3D mode (pp.
48-49, 74).
SELECT button
– Execute the selected item (p.23).
– Zoom in and out the image in the Digital zoom
mode (p.39).
12

Top Controls and Indicators

ON/STAND-BY button
AUTO SETUP button
KEYSTONE button
MENU button
Point
Infrared Remote Receiver
Turn the projector on or off (pp.20-22).
Execute the setting of Auto setup (includes Input
search function and Auto PC adj. function). (pp.26,
51)
Correct the keystone distortion (pp.26, 40, 47).
Open or close the On-Screen Menu (p.23).
buttons
– Select an item or adjust the value in the On-
Screen Menu (p.23).
– Pan the image in Digital zoom + mode (p.39).
– Adjust the volume level (with Point
(p.27).
– Adjust the screen size (with Point
(p.25).
The protruding shape allows wide-angle remote
control signal reception.
buttons)
buttons)