Input Source Selection (Computer 2: Rgb) - Sanyo PDG-DXL2000 Owner's Manual

Input Source Selection (Computer 2: RGB)

Direct Operation
Choose Computer 2 (RGB) by press the COMPUTER 2
button on the remote control.
Menu Operation
Press the MENU button to display the On-Screen
1
Menu. Press the Point
to Input and then press the Point
button.
2 Use the Point buttons to select Computer 2 and
then press the SELECT button.
3
When Computer 2 is selected, analog RGB input
source will be selected directly.
Note:
When the Input Search function is set to On 1 or On 2 in
the Auto setup function, the input signal will be searched
automatically (p.51).
buttons, move the highlight
or the SELECT
Remote Control
COMPUTER 2 button
Computer 2 (RGB)
Note:
* COMPUTER 2 can not be selected when
using the COMPUTER IN 2/ MONITOR
OUT terminal as MONITOR OUT.
"Monitor out" message will appear on the
screen when COMPUTER 2 button is
pressed while using the COMPUTER IN
2/ MONITOR OUT terminal as MONITOR
OUT.
Input Menu
Computer Input
*
31