Sanyo PDG-DXL2000 Owner's Manual page 29

3D button
Select 3D mode from 3D Off, 3D(Sync 1), 3D(Sync 2) and
3D VISION. (p.48-49)
3D Off
3D VISION
* The 3D indicator on the control panel emits blue at 3D (Sync 1),
3D(Sync 2) and 3D VISION. (p.48-49)
NO SHOW button
Press the NO SHOW button on the remote control to black
out the image. To restore to normal, press the NO SHOW
button again or press any other button. When the projected
image is captured and is set as User in the Logo selection
(p.53), the screen changes each time you press the NO
SHOW button as follows.
black out the captured image
Note:
When use the MUTE button to release the No Show
function, the mute function can not be operated at the
same time.
P-TIMER button
Press the P-TIMER button on the remote control. The Timer
display "00 : 00" appears on the screen and starts to count
time (00 : 00–59 : 59).
To stop the P-TIMER, press the P-TIMER button.
To cancel the P-TIMER, press the P-TIMER button again.
IMAGE button
Press the IMAGE button on the remote control to select a
desired image mode of the screen. See page 36 for details.
SCREEN button
Select the screen size (See pages 38-40, 46-47 for details).
3D(Sync 1)
3D(Sync 2)
normal • • • • •
Remote Control
Note:
See the previous page for the description of
other buttons.
No Show
No show disappears after 4 seconds.
P-Timer
Basic Operation
SCREEN button
P-TIMER button
NO SHOW button
3D button
IMAGE button
29