Remote Control - Sanyo PDG-DXL2000 Owner's Manual

ON/STAND-BY button
Turn the projector on or off. (pp.20-
22)
AUTO SET button
Execute the setting of Auto setup
(includes Input search function and
Auto PC adj. function). (pp.26, 51)
COMPUTER 1/2 buttons
Select the COMPUTER 1 or
COMPUTER 2 input source.
(pp.30-31, 42)
VIDEO button
Select the VIDEO input source.
(p.41)
Note:
To ensure safe operation, please observe the following precautions:
• Do not bend, drop, or expose the remote control to moisture or heat.
• For cleaning, use a soft dry cloth. Do not apply benzene, thinner, spray, or any chemical material.

Remote Control

S-VIDEO button
Select the S-VIDEO input source. (p.41)
Point
buttons
– Select an item or adjust the value in the On-Screen Menu.
(p.23)
– Pan the image in the Digital zoom + mode. (p.39)
SCREEN button
Select a screen mode. (pp.29, 38-40, 46-47)
MENU button
Open or close the On-Screen Menu. (p.23)
FREEZE button
Freeze the picture on the screen. (p.28)
NO SHOW button
Temporarily turn off the image on the screen. (p.29)
D.ZOOM buttons
Zoom in and out the images. (pp.28, 39)
VOLUME +/- buttons
Adjust the volume level. (p.27)
MUTE button
Mute the sound. (p.27)
IMAGE button
Select the image mode. (pp.29, 36)
3D button
Operate the 3D function. (pp.29, 48-49)
LAMP button
Select a lamp mode. (pp.28, 58)
P-TIMER button
Operate the P-timer function. (p.29)
INFO. button
Operate the information function. (pp.28, 63)
KEYSTONE button
Correct the keystone distortion. (pp.26, 40, 47)
SELECT button
– Execute the selected item. (p.23)
– Zoom in and out the image in Digital zoom mode. (p.39)
COMPONENT button
Select the COMPONENT input source. (p.42)
HDMI button
Select the HDMI input source. (p.42)
Part Names and Functions
13