Table of Contents
Advertisement
5. Be sure to note the correct direction that the paper comes off the roll.
6. Pull out a small amount of paper, as shown. Then close the cover.
Notes : When closing the cover, press the center of printer cover firmly to prevent
paper miss-loading
7. Tear off the paper as shown.
10
1-7. Adjustments and Settings
1)It has 2 features ; Paper end and Black mark. For detecting Paper End,
it must be positioned at "a" Position in drawing and it is a factory default setting.
For detecting Black mark printed on the paper, it must be moved to "b" position.
2) Optical density (O.D) must be higher than 0.6 in density to secure a standard working
condition.
Make sure if the density of paper black mark is lesser it might be a cause of normality.
3) Table of O.D value (Reference)
1.4
0.9
0.6
0.3
0.2
11
Advertisement
Table of Contents
