Samsung SRP-370 User Manual page 37

<Function 2> GS ( M pL pH fn m (fn=2, 50)
[Format] ASCII GS (
Hex 1D 28
Decimal 29 40
[Range] (pL + pH x 256) = 2 (pL=2, pH=0)
fn=2, 50
m=0, 1, 48, 49
[Description] ▪ When (m=0,48), initializes all settings in the active area, as described in
these specifications.
▪ When (m=1,49), copies the setting stored in the mth storage area to the
active area. If no data in the storage area is protected, all settings in the
active area are initialized as described in these specifications.
<Function 3> GS ( M pL pH fn m (fn=3, 51)
[Format] ASCII GS (
Hex 1D 28
Decimal 29 40
[Range] (pL + pH x 256) = 2 (pL=2, pH=0)
fn=3, 51
m=0, 1, 48, 49
[Description] ▪ When m=0,48, does not load data in the storage area to the active area
upon initialization.
▪ When m=1,49, loads data in the storage area to the active area upon
initialization.
GS ( N pL pH fn [parameter]
[Name] Select character style.
[Description] ▪ Executes commands for the character style as specified by the function
code fn.
fn Format
48 GS ( N pL pH fn m
<Function 48> GS ( N pL pH fn m (fn=48)
[Format] ASCII GS (
Hex 1D 28
Decimal 29 40
[Range] (pL + pH x 256) = 2 (pL=2, pH=0)
fn=48
m=49 (when the monochrome paper is selected)
m=49,50 (when the two-color paper is selected)
[Default] m=49
[Description] ▪ Prints characters in the color specified by m.
m
49
50
- Color 1 means black (high level of energy) in the specified two-color
thermal paper.
- Color 2 means red (low level of energy) in the specified two-color
thermal paper.
M pL pH fn m
4D pL pH fn m
77 pL pH fn m
M pL pH fn m
4D pL pH fn m
77 pL pH fn m
Function No. Description
Function 48 Selects character color.
N pL pH fn m
4E pL pH fn m
78 pL pH fn m
Color
Color 1
Color 2
72
GS * x y [d1...d(x x y x 8)]
[Name] Define downloaded bit image.
[Format] ASCII GS
Hex 1D
Decimal 29
[Range] 1 ≤ x ≤ 255
1 ≤ y ≤ 48 (where x x y ≤ 1536)
0 ≤ d ≤ 255
[Description] ▪ Defines the downloaded bit image using the number of dots specified by x
and y.
- x specifies the number of dots in the horizontal direction.
- y specifies the number of dots in the vertical direction.
▪ When the memory switch 8-7 is On, the user-defined character and the
downloaded bit image cannot be defined simultaneously. The downloaded
bit image data is cleared with this command.
GS / m
[Name] Print downloaded bit image.
[Format] ASCII
Hex
Decimal
[Range] 0 ≤ m ≤ 3, 48 ≤ m ≤ 51
[Description] ▪ Prints the defined downloaded bit image in m mode.
- For SRP-370
m Mode
0, 48 Normal
1, 49 Double-width
2, 50 Double-height
3, 51 Quadruple
- For SRP-372
m Mode
0, 48 Normal
1, 49 Double-width
2, 50 Double-height
3, 51 Quadruple
GS :
[Name] Start/end macro definition.
[Format] ASCII
Hex
Decimal
[Description] ▪ Starts or ends macro definition.
- The contents of the macro can be defined up to 2048 bytes.
* x y [d1...d(x x y x 8)]
2A x y [d1...d(x x y x 8)]
42 x y [d1...d(x x y x 8)]
GS / m
1D 2F m
29 47 m
Vertical dot density Horizontal dot density
180 dpi 180 dpi
180 dpi 90 dpi
90 dpi 180 dpi
90 dpi 90 dpi
Vertical dot density Horizontal dot density
203 dpi 203 dpi
203 dpi 203/2 dpi
203/2 dpi 203 dpi
203/2 dpi 203/2 dpi
dpi : dots per 25.4mm {1"}
GS :
1D 3A
29 58
73