Samsung SRP-370 User Manual page 25

ESC ? n
[Name] Cancel user-defined characters.
[Format] ASCII ESC
Hex 1B
Decimal 27
[Range] 32 ≤ n ≤ 126
[Description] ▪ Cancels user-defined characters, specified with character codes on a
selected sheet.
ESC @
[Name] Initialize printer.
[Format] ASCII ESC
Hex 1B
Decimal 27
[Range] 32 ≤ n ≤ 126
[Description] ▪ Clears the data in the print buffer and resets the printer mode to the
mode that were in effect when the power was turned on.
ESC D n1... nk NUL
[Name] Set horizontal tab positions.
[Format] ASCII ESC
Hex 1B
Decimal 27
[Range] 1 ≤ n ≤ 255
0 ≤ k ≤ 32
[Default] n=8, 16, 24, 32, 40,....., 232, 240, 248
(for font A in a standard character size width)
[Description] ▪ Sets horizontal tab positions.
- n specifies the number of digits from the setting position to the left
margin or the beginning of the line.
- k specifies the number of bytes set for the horizontal tab position.
ESC E n
[Name] Turn emphasized mode on / off.
[Format] ASCII ESC
Hex 1B
Decimal 27
[Range] 0 ≤ n ≤ 255
[Default] n=0
[Description] ▪ Turns emphasized mode on or off.
- When the LSB of n is 0, emphasized mode is turned off.
- When the LSB of n is 1, emphasized mode is turned on.
? n
3F n
63 n
@
40
64
D n1...nk NUL
44 n1...nk 00
68 n1...nk 0
E n
45 n
69 n
48
ESC G n
[Name] Turn double-strike mode on/off.
[Format] ASCII ESC
Hex 1B
Decimal 27
[Range] 0 ≤ n ≤ 255
[Default] n=0
[Description] ▪ Turns double-strike mode on or off.
- When the LSB of n is 0, double-strike mode is turned off.
- When the LSB of n is 1, double-strike mode is turned on.
ESC J n
[Name] Print and feed paper.
[Format] ASCII ESC
Hex 1B
Decimal 27
[Range] 0 ≤ n ≤ 255
[Description] ▪ Prints the data in the print buffer and feeds the paper [n X vertical motion unit].
▪ For SRP-370
- The maximum paper feed amount is approximately 1016mm{40"} if [n
X vertical motion unit] exceeds 1016mm{40"}.
▪ For SRP-372
- The maximum paper feed amount is approximately 900mm {35.5"} if
[n X vertical motion unit] exceeds 900mm {35.5"}.
ESC L
[Name] Select page mode.
[Format] ASCII ESC
Hex 1B
Decimal 27
[Description] ▪ Switches from standard mode to page mode.
ESC M n
[Name] Select character font.
[Format] ASCII ESC
Hex 1B
Decimal 27
[Range] For SRP-370 : n = 0, 1, 48, 49
For SRP-372 : 0 ≤ n 2, 48 ≤ n ≤ 50
[Default] n=0
[Description] ▪ Selects only-byte character fonts.
G n
47 n
71 n
J n
4A n
74 n
L
4C
76
M n
4D n
77 n
49