Samsung SRP-370 User Manual page 29

FS p n m
[Name] Print NV bit image.
[Format] ASCII FS
Hex 1C
Decimal 28
[Range] 1 ≤ n ≤ 255
0 ≤ m ≤ 3, 48 ≤ m ≤ 51
[Description] ▪ Prints an NV bit image n in m mode.
- For SRP-370 :
m Mode Vertical Dot Density (DPI)
0, 48 Normal 180 dpi
1, 49 Double-width 180 dpi
2, 50 Double-height 90 dpi
3, 51 Quadruple 90 dpi
- For SRP-372 :
m Mode Vertical Dot Density (DPI)
0, 48 Normal 203 dpi
1, 49 Double-width 203 dpi
2, 50 Double-height 203/2 dpi
3, 51 Quadruple 203/2 dpi
FS q n [xL xH yL yH d1...dk]1...[xL xH yL yH d1...dk]n
[Name] Defined NV bit image.
[Format] ASCII FS q n
Hex 1C 71 n
Decimal 28 113 n
[Range] 1 ≤ n ≤ 255
1 ≤ (xL + xH ×256) ≤ 1023 (0 ≤ xL ≤ 255, 0 ≤ xH ≤ 3)
1 ≤ (yL + yH ×256) ≤ 288 (0 ≤ yL ≤ 255, yH=0,1)
0 ≤ d ≤ 255
k = (xL + xH × 256) × (yL + yH × 256) × 8
Either one of the total capacity data [0, 64k, 128k, 192k, 256k, 320k, 384k]
bytes can be selected by GS ( E. The default value is 384 KB.
[Description] ▪ Defines the specified NV bit image.
- n specifies the number of the NV bit image you are defining.
- xL, xH specify the number of dots in the horizontal direction for the NV
bit image with [(xL + xH × 256) x 8].
- yL, yH specify the number of dots in the vertical direction for the NV bit
image with [(yL + yH × 256) x 8].
▪ If this command is processed when the NV graphics is defined with GS ( L or GS 8 L,
delete all NV graphics data, then define the bit image data with this command.
[Notes] ▪ Frequent write command executions by this command may damage to the NV memory.
Therefore, it is recommended to write to the NV memory 10 times or less a day.
▪ During processing of this command, the printer is BUSY while writing the
data to the NV bit image memory and stops receiving data. Therefore, it is
prohibited to transmit data, including real-time commands, during the
execution of this command.
p n m
70 n m
112 n m
dpi : dots per 25.4mm {1"}
Horizontal Dot Density (DPI)
180 dpi
90 dpi
180 dpi
90 dpi
Horizontal Dot Density (DPI)
203 dpi
203/2 dpi
203 dpi
203/2 dpi
[xL xH yL d1...dk]1... [xL xH yL d1...dk]n
[xL xH yL d1...dk]1... [xL xH yL d1...dk]n
[xL xH yL d1...dk]1... [xL xH yL d1...dk]n
56
GS ! n
[Name] Select character size.
[Format] ASCII GS
Hex 1D
Decimal 29
[Range] 0 ≤ n ≤ 255
(where 1 ≤ Enlargement in vertical direction ≤ 8, 1 ≤ Enlargement in
horizontal direction ≤ 8)
[Default] n=0
[Description] ▪ Selects character size (enlargement in vertical and horizontal directions).
Bit Function
0
Specifies the number of times
1
enlarged in the vertical
2
direction
3
4
Specifies the number of times
5
enlarged in the horizontal
6
direction
7
- Table 1 [Enlarged in horizontal direction]
Hex Decimal Enlargement
00 0 1 time (standard)
10 16 2 times
20 32 3 times
30 48 4 times
40 64 5 times
50 80 6 times
60 96 7 times
70 112 8 times
- Table 1 [Enlarged in vertical direction]
Hex Decimal Enlargement
00 0 1 time (standard)
01 1 2 times
02 2 3 times
03 3 4 times
04 4 5 times
05 5 6 times
06 6 7 times
07 7 8 times
GS $ nL nH
[Name] Set absolute vertical print position in page mode.
[Format] ASCII GS
Hex 1D
Decimal 29
[Range] 0 ≤ (nL + nH x 256) ≤ 65535 (0 ≤ nL ≤ 255, 0 ≤ nH ≤ 255)
[Description] ▪ Sets the absolute vertical print starting position to [(nL + nH × 256) ×
(vertical or horizontal motion units)].
! n
21 n
33 n
Setting
Refer to Table 2
[Enlarged in vertical direction]
Refer to Table 1
[Enlarged in horizontal
direction]
$ nL nH
24 nL nH
36 nL nH
57