Panasonic WJ-SX550A Operating Instructions Manual page 4

PREFACE
The WJ-SX550A Matrix Switcher, when combined with the
optional WV-CU550A System Controller and WJ-AD550
Extension Unit, allows for flexible control of 128 cameras
and 16 monitors.
Through the use of user-friendly, on-screen menu setups,
programmable sequences and tours can be easily estab-
lished for customized security requirements.
The use of modular construction for the WJ-SX550A Matrix
Switcher allows for flexible expansion for future needs.
FEATURES
The WJ-SX550A Matrix Switcher, when combined with the
WV-CU550A System Controller and WJ-AD550 Extension
Unit enables control of the following functions:
• Routing of up to 128 cameras to any one of 16 moni-
tors.
• Remote control of up to 128 cameras and auxiliary
equipment, by using optional receivers and acces-
sories, including:
1. Remote control of Pan-Tilt Head and Camera
Housing.
2. Remote control of Motorized Zoom Lenses:Focus,
Zoom and Iris.
3. Remote control of camera setting, including
Electronic Sensitivity Up, Electronic Shutter,
Electronic Zoom, and more.
Additional features of the WJ-SX550A include:
Versatile Camera Switching Modes
• Independent programmable sequence for each moni-
tor (16 programs)
• 32 tours including Dwell Time, Camera Preset Position
and AUX Controls for any monitor
• 8 group synchronized sequences including Dwell
Time, Camera Preset Positions and AUX Controls
• Any tours or group synchronized sequence can be
called up by operators manually, by alarm and time
date schedule automatically
Flexible Alarm Activations
• Alarm Mode 1: Single monitor is assigned for auto
alarm call up with single VTR control.
• Alarm Mode 2: 4 monitors are assigned for auto alarm
call up with 4 VTR controls.
• Alarm Mode 3: Any camera, with its preset position,
can be assigned to any monitor.
Alternatively, any tour or group sequence can be
assigned to any monitor or group of monitors.
Programmable System Partitioning and Priority
• Operator Registration: 5 operator access levels to sys-
tem for setup and operation.
Password protection to limit operators access to sys-
tem
Operator priority to lock out lower priority operators.
PRECAUTIONS
• All necessary procedures, with regards to the installa-
tion of this unit should be made by qualified service
personnel or system installers.
• Do not attempt to disassemble the unit.
In order to prevent electric shock, do not remove
screws or covers. There are no user-serviceable parts
inside.
Do refer all servicing to qualified service personnel.
• Handle the unit with care.
Do not abuse the unit. Avoid striking, shaking, etc. It
could be damaged by improper handling or storage.
• Do not expose the unit to rain or moisture, or try to
operate it in wet areas.
Do take immediate action if the unit becomes wet.
Turn the power off and refer servicing to qualified ser-
vice personal. Moisture can damage the unit and also
create the danger of electric shock.
• Do not use strong or abrasive detergents when clean-
ing the unit body.
Do use a dry cloth to clean the unit when dirty.
In case the dirt is hard to remove, use a mild deter-
gent and wipe gently.
• Do not operate the unit beyond its temperature,
humidity or power source ratings.
Do not use the unit in an extreme environment where
high temperature or high humidity exist.
Use the unit under conditions where temperatures are
within 10°C - +50°C (14°F - 122°F), and humidity is
below 90%.
The input power source is 220 - 240V AC 50 Hz.
-1-