Panasonic WJ-SX550A Operating Instructions Manual page 104

6-3 Pan/Tilt Control (Preset Operation)
The following function is only available with cameras that
have preset panning functions, such as the Panasonic WV-
CS500 and WV-CS600.
1. Select the desired camera and monitor.
Refer to Camera Selection and Monitor Selection on
page 98.
2. Select the preset number by pressing the Numeric
Keys.
A1
Camera
Monitor 16
3. Press the Preset (PRESET) Switch to activate the
Pan/Tilt Head to move to the preset position.
6
6-4 Pan/Tilt Control (Camera Position Operation)
The following function is available only when the Mode
Selection Switch is selected at CAM-P Mode on the rear of
the System Controller.
1. Select the desired monitor.
Refer to the Monitor Selection on page 98.
2. Select the CAM-P (D5) Menu on the LCD by pressing
the Cursor Keys.
D5
CAM-P Menu
Set Clear Test Mode
F1 F2
1 2 3
4 5 6
7 8 9
0
MON CAM
ESC SET
01 1
PRESET
AF
F3 F4
3. Press the Function (F4) Key to display the menu
shown below.
CAM-P Mode Off
On
F1 F2
4. Press the Function (F1) Key repeatedly to select the
On mode.
CAM-P Mode On
Off
F1 F2
Note: After selected On mode on the LCD by pressing
the Function (F1) Key, the Monitor (MON) Key will
be activated to execute the selection.
When selecting the monitor, press the Function
(F1) Key instead of the Monitor (MON) Key while
the Camera/Monitor Selection (A1) Menu is dis-
played on the LCD.
5. Press the Function (F4) Key to return to the CAM-P
Menu.
6. Select the desired camera position number by press-
ing the Numeric Keys, then press the Monitor (MON)
Key to activate the camera to move the preset posi-
tion.
1
4
7
MON
ESC
Note: If operating above functions, it is required to
register the preset position number with the cam-
era number.
Refer to the Mode Selection Switch Setting on
page 56 and the Camera Position Number Setting
on page 115 for more details.
-100-
Exit
F3 F4
Exit
F3 F4
2 3
5 6
8 9
0
CAM
SET