Handling Documents; Section 5 Handling Documents; Using The Automatic Document Feeder (Adf); Figure 1-19 Loading The Automatic Document Feeder - NEC IT3510 Operation Manual

NEC IT Series
S 5 H
ECTION ANDLING
This section provides information on correctly handling documents for transmission or
copying. Document pages may be inserted in two different ways. For additional
details, refer to Section 5.4 Notes on Handling Documents on page 1-27.
Before Starting Operations:
5.1
NEC IT3510/IT2510 Operations Manual
D
OCUMENTS
The Automatic Document Feeder (ADF) feeds document pages one-by-one, when transmitting
and copying. Pages are away placed information side up, will scan from the top page down,
and will exit the ADF in their original order.
The Book Scanner is used when transmitting or copying documents that cannot be handled by
the ADF, such as books, catalogs, and bound materials.

Using the Automatic Document Feeder (ADF)

1. Place the document face up at the left side of the Document Feed Tray.
The right side is used for the 2-Sided Document Feeder.
2. Position the document firmly against the left of the document hopper (right
for the 2-Sided Document Feeder) and adjust the Document Guide
Plate(s) to the width of the pages.
Extension Guide and lift the Stopper to prevent the pages from falling off
the feeder.
3. Insert the document pages gently until they reach their initial edge and
stop inside the feeder.
Automatic Document Feeder
Place the document face up in the feeder.

Figure 1-19 Loading the Automatic Document Feeder

For long documents, pull out the
2-Sided Document Feeder (optional)
Place the document face up in the feeder.
Extension
Guide
Stopper
Issue 1
1 - 25