Timer Transmission - NEC IT3510 Operation Manual

NEC IT Series
2.7
NEC IT3510/IT2510 Operations Manual
Priority Transmission (Continued)
5.
Press <Start>. The document
will be now be scanned.

Timer Transmission

The Timer Transmission feature allows a scanned document to be sent at a
specific time. This can save on long-distance and international call charges by
timing the transmissions after telephone rates are discounted (typically after
11 pm local time, and on weekends).
Before Starting Operations:
Use the 24-hour clock to set the time. The time must be set accurately in order for the
document to be sent at the correct time.
The timer setting is reset after each transmission.
Up to 64 documents can be stored for Timer Transmission.
Real-Time Transmission and Priority Transmission features cannot be performed in
combination with a Timer Transmission.
Timer Transmission
1.
Load the document in the
Automatic Document Feeder.
Refer to Section 5 Handling
Documents in Chapter 1 Getting
Started on page 1-25.
2.
Press <FAX/MAIL>.
3.
Select [Set 1] from [FAX Menu],
then touch [Timer Set].
Issue 1
6 - 15