Priority Transmission - NEC IT3510 Operation Manual

Issue 1
2.6
6 - 14

Priority Transmission

This feature allows an urgent document to be transmitted with top priority. If a
serial broadcast is in progress, the urgent document can be stored into
memory and will be sent as soon as the job in progress is finished. The urgent
document is then transmitted and the serial broadcast then resumes where it
was interrupted.
Before Starting Operations:
Only one recipient can be specified for this feature.
The Timer Transmission feature cannot be used with this feature.
Priority Transmission
1.
Load the document in the unit.
Refer to Section 5 Handling
Documents in Chapter 1 Getting
Started on page 1-25.
2.
Press <FAX/MAIL>.
3.
Select [Set 1] from [FAX Menu],
then touch [Priority TX].
4.
Select the destination.
Refer to Section 2.1 Quick
Memory Transmission in Chapter
5 Basic Sending and Receiving
Operations on page 5-1, Section
2.6 Using One-Touch Dialing in
Chapter 5 Basic Sending and
Receiving Operations on page
5-7, or Section 2.7 Using
Abbreviated Dialing in Chapter 5
Basic Sending and Receiving
Operations on page 5-9.
Advanced Sending and Receiving Operations
NEC IT Series