Issue 1
2.9
3 - 24
Setting the Stand-by Screen (Continued)
3.
Select [Priority Screen] on the
Priority Screen.
4.
Select the stand-by screen from
the three choices listed, then
touch [Enter].
i
To select:
[Copy]
Touch this to initially display the copy
screen.
[FAX]
Touch this to initially display the
facsimile screen.
[Auto]
Touch this to initially display the Auto
mode screen.
The selected key is displayed in
reverse.
5.
Confirm the setting details when
the screen returns as that shown
in step 3. Touch [Enter] if the
setting is correct.
6.
Touch [Enter] repeatedly until
the display returns to the stand-
by screen.
Setting the Priority Facsimile Screen
When the <FAX/MAIL> key is pressed, the display will show one of the
following four screens to choose a destination, or to allow dialing of a facsimile
number:
NEC IT Series
Registration and Setting Operations