Registering The Self-Telephone Number - NEC IT3510 Operation Manual

Issue 1
2.4
3 - 16

Registering the Self-Telephone Number

This section describes the registration process for the Self-Telephone
Number. This number is simply the facsimile telephone number used at this
machine, and it identifies this unit at the remote destination.
Before Starting Operations:
Up to 20 digits can be registered as the number.
This number may be printed on report(s) or list(s) at the destination.
recommended that the full telephone number be registered (including area code) and
that this number be corrected if a new facsimile telephone number is ever issued.
This same procedure is used to modify a currently registered Self-Telephone Number.
Registering and Modifying the Self-Telephone Number
1.
Touch [Initial Setting] on the
Administrator Management
screen.
2.
Select [ID] and touch
[Self-telephone #].
i
When the 2nd G3 Port model is
used:
When the optional 2nd G3 Port is
installed, two
telephone numbers will be issued.
Touch [Self-telephone #1] or [Self-
telephone #2] to register each facsimile
number.
separate facsimile
Registration and Setting Operations
NEC IT Series
It is