Registering A Document On A Bulletin Board - NEC IT3510 Operation Manual

NEC IT Series
2.18
NEC IT3510/IT2510 Operations Manual

Registering a Document on a Bulletin Board

Documents can be made available to anyone by establishing a mailbox on the
unit. Those who know the password can register documents on the Bulletin
Board either on-site, or from a remote facsimile.
For example, a Bulletin Board might be established to hold a company's latest
sales brochure, or technical information updates about a certain product. This
information can be retrieved 'on demand', at the convenience of the recipient.
Before Starting Operations:
Before registering a document on a Bulletin Board, the Bulletin Board must be
established do that F CODE passwords can be registered. Refer to Section 3.3
Establishing a Bulletin Board in Chapter 4 Advanced Registration and Setting
Operations on page 4-54.
When documents are registered on a Bulletin Board from a remote facsimile, the
F CODE and F CODE password registered for each Bulletin Board need to be
specified. If the F CODE and F CODE password do not match, the document cannot
be registered on the Bulletin Board. Refer to Section 2.17 F CODE on page 6-29.
Up to 10 Bulletin Boards can be established. Only one document can be registered
per Bulletin Board.
If a new document is registered on a Bulletin Board where another already exists, the
new document data replaces the previously registered data.
Registering a Document on a Bulletin Board
1.
Load the document in the unit.
Refer to Section 5 Handling
Documents in Chapter 1 Getting
Started on page 1-25.
2.
Press <FAX/MAIL>.
3.
Select [Bultn.] from [FAX
Menu], then touch [Reg.].
Issue 1
6 - 33