Using Full Dialing For International Destinations; When Transmission Is Unsuccessful - NEC IT3510 Operation Manual

Issue 1
2.4
2.5
5 - 6

Using Full Dialing for International Destinations

If the country code and the destination's facsimile number are entered after
the international code, a busy signal (or "fast busy") may be heard, and dialing
may be impossible.
In this case, it may be necessary to enter a pause to allow proper dialing
timing to occur. It is recommended that <Pause> be pressed twice to enter a
six-second pause after the international code.
number may be dialed as normal.

When Transmission is Unsuccessful

A Non-transmission report is printed whenever a document cannot be
Ë
sent. The report contains part of the first page image of the
unsuccessful document, as well as details about the attempted
transmission.
If a document could not be transmitted, it can be resent. To re-send,
Ë
touch [Activity List] and then touch [TX] to identify the unsuccessful
document.
After this, the rest of the
Basic Sending and Receiving Operations
NEC IT Series