Colour Temperature; Film Mode - Sharp PZ-MR2X Operation Manual

Basic adjustment settings

Colour temperature

MENU
Adjust the colour temperature to give a better white
Picture
balance.
USER
1
Advanced
2
Colour Temp [Mid]
High
Mid-High
3
Mid
Mid-Low
4
Low
5
6
A
• Return to the previous menu by pressing RETURN.
• If you select "STANDARD" with AV MODE on the remote

Film mode

MENU Automatically detects a film-based source (originally
encoded at 24 frames/second), analyses it then
Picture
recreates each still film frame for high-definition picture
USER
quality.
Advanced
Film Mode [On] 1
Off
2
On
3
4
5
6
A
• Return to the previous menu by pressing RETURN.
• If you select "STANDARD" with AV MODE on the remote
Press MENU.
Press a/b to select "Picture", and then press
ENTER.
Press a/b to select "Advanced", and then press
ENTER.
Press a/b to select "Colour Temp", and then press
ENTER.
Press a/b to select the desired level, and then
press ENTER.
Press MENU to exit the menu.
control unit, this item will display in gray and not be
selectable. See page 55.
Selected item
High White with Bluish tone
Mid-High
Mid
Mid-Low
Low
White with Reddish tone
Press MENU.
Press a/b to select "Picture", and then press
ENTER.
Press a/b to select "Advanced", and then press
ENTER.
Press a/b to select "Film Mode", and then press
ENTER.
Press a/b to select "On", and then press ENTER.
Press MENU to exit the menu.
control unit, or input sources with 1080I, 720P or 480P
component signals, this item will display in gray and
not be selectable. See page 55.
Selected item
Off Normal viewing mode
On
Detects, analyses, converts film source
Occasionally, when you select "On" for a
non-film-based 508i source, the picture
becomes unstable. In that case, select
"Off".
Description
Description
E-40