Table of Contents
Advertisement
Safety precautions
CAUTION: Please read all of these instructions before you operate your Plasma Display TV
and save these instructions for later use.
• Do not plug the power cord into an
outlet that is not firmly attached to
the wall, as this could cause
overheating and fire. Have an
authorized dealer or qualified
electrician replace the outlet.
• Plug the power cord in to the wall
outlet securely. Failure to plug in
completely
could
generate
excessive heat, or if dust has
gathered, cause hazardous electric
shock and fire. Touching plug pins
could also cause electric shock.
• Never touch the power cord plug
with wet hands, as this could cause
hazardous electric shock.
• Never pull the power cord too
strongly with your hands, as this
could damage the cord and cause
hazardous electric shock and fire.
• Ventilation—The cabinet has
ventilation openings that should
never be blocked or covered.
Insufficient air circulation could
cause overheating and shorten
product life. Do not place on soft
surfaces (e.g. bed, sofa, rug), as
doing so could block ventilation
openings and cause internal parts
to overheat and catch fire.
• Never overload an outlet with too
many connections, as this could
cause hazardous electric shock
and fire.
• Heat sources—Keep the product
away from heat-generating sources
such as radiators, heaters, stoves
and amplifiers.
• When preparing to move the
product, detach all connected
cables. Failure to do so could
damage the power cord and cause
hazardous electric shock and fire.
• Avoid using the Plasma Display TV
in extremely humid or dusty
environments. Placing beside a
cooking appliance or humidifier
could cause hazardous electric
shock and fire.
• Stand—Do not place the product
on an unstable surface such as a
cart, stand, tripod or table, as this
could cause the product to fall over,
become damaged or injure
persons nearby. Take special care
when children are in the area. When
mounting the product on a wall, be
sure to follow the manufacture's
instructions. Use only the mounting
hardware recommended by the
manufacturer.
E-4
Advertisement
Table of Contents
