Input Signal Source - Sharp PZ-MR2X Operation Manual

Useful adjustment settings
INPUT 1 signal menu
MENU
Option
Input Select
Input1 [AUTO]
AUTO
AV-Y/C
COMPONENT
INPUT 3 signal menu
MENU
Option
Input Select
Input3 [AUTO]
AUTO
AV-Y/C
COMPONENT
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC

Input signal source

Input signal setting
For setting the signal type of external equipment.
1
Press MENU.
2
Press a/b to select "Option", and then press
ENTER.
3
Press a/b to select "Input Select", and then press
ENTER.
4
Press a/b to select an input source you want to
set, and then press ENTER.
5
Press a/b to select a signal type, and then press
ENTER.
• If the selected signal type is incorrect, an image does
not display or no colour image displays.
6
Press MENU to exit the menu.
A
• Return to the previous menu by pressing RETURN.
• The System automatically sets input signals from "INPUT2,
INPUT4" and "PC".
• If no image displays, try to change the signal type.
• Check the operation manual of the external equipment
for the signal type.
• Setting INPUT 1 and INPUT 3 signal selection to "AUTO"
when other equipment is connected will result in the
following connectivity priority.
INPUT 1
1. COMPONENT VIDEO
2. S-VIDEO
3. VIDEO
Input selection
Can use for selecting the input source.
1
Press b on the remote control unit or INPUT on
the Plasma Display.
• INPUT SOURCE menu displays.
2
Hold down b on the remote control unit or INPUT
on the Plasma Display to select the input source.
• An image from the selected source automatically
displays.
• You can also select the input source by pressing
a/b.
A
• Items grayed out are not selectable.
INPUT 3
1. COMPONENT VIDEO
2. S-VIDEO
3. VIDEO
E-54