Specifications - Sharp PZ-MR2X Operation Manual

Appendix

Specifications

Item
Number of Dots
12 We12 W (10 % distortion )
Audio Amplifier
Surround System
Power Requirement
Dimensions
Weight
Accessories
Item
Colour System
TV Receiving System
Function
Tuner
Auto Channel Preset
STEREO
Terminals Rear
Front
Monitor Out Terminal
Power Requirement
Dimensions
Weight
Accessories
* AThe power cord for Plasma Display is supplied with AVC System.
• Design and specifications are subject to change without notice.
50o Plasma Display Model: PZ-50HV2
2,949,120 dots
SRS/FOCUS/FOCUSeSRS
AC 110-240V, 50/60 Hz, 371 W(0.8 W Standby)
1436 (W) g 826 (H) g 428 (D) mm
with set stand and speakers
52 kg with set stand and speakers
Cleaning cloth, Two screws for preventing the System from falling over, Stopper for set
stand, Four screws for set stand, System cable clamp, Five speaker cable clamps, Four
speaker brackets, Hexagon wrench, Two speaker cables, Two kinds of four screws for
speaker bracket, Two spacers for speakers, Two speakers
AVC System, Model: PZ-MR2M/PZ-MR2X
PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL -60
PAL: B/G, D/K, I, M
VHF/UHF 44.25–863.25MHz
CATV Hyper-band, S1–S41ch
99 ch, Auto Preset, Auto Label, Auto Sort
NICAM/IGR
INPUT 1 AV in, S-VIDEO in, COMPONENT VIDEO in
INPUT 2 AV in, S-VIDEO in
INPUT 3 AV in, S-VIDEO in, COMPONENT VIDEO in
Antenna 75 q Din Type for VHF/UHF in
INPUT 4 AV in, S-VIDEO in
PC 15 Pin mini D-Sub, Audio in
Rear Audio (Variable, Fixed), S-VIDEO out, VIDEO out
AC 110–240 V, 50/60 Hz, 40 W (0.8 W Standby)
430 (W), 70 (H), 330 (D) mm
4.4 kg
Power cord for South east Asia (South east Asia model only) (g2)*, Power cord
for Australia (Australia model only) (g2)*, Remote control unit, Two AA size
batteries, System Cable, Operation Manual
43o Plasma Display Model: PZ-43HV2
2,359,296 dots
12 We12 W (10 % distortion)
SRS/FOCUS/FOCUSeSRS
AC 110-240V, 50/60 Hz, 319W(0.8 W Standby)
1288(W) g 742 (H) g 428 (D) mm
with set stand and speakers
44.5 kg with set stand and speakers
SECAM: B/G, D/K NTSC3.58M NTSC4.43M
E-70