Table of Contents
Advertisement
Basic adjustment settings
AV MODE
MENU
ENTER
/
38
MENU
Picture
DYNAMIC
Advanced
Colour Temp
[High]
High
Mid-High
Mid
Mid-Low
Low
MENU
Picture
DYNAMIC
Advanced
Film Mode
[On]
Off
On
Colour temperature
Adjust the colour temperature to give the best white
image.
1
Press MENU.
2
Press a/b to select "Picture", and then press
ENTER.
3
Press a/b to select "Advanced", and then press
ENTER.
4
Press a/b to select "Colour Temp", and then press
ENTER.
5
Press a/b to select the desired level, and then
press ENTER.
6
Press MENU to exit the menu.
A
• Return to the previous menu by pressing RETURN.
• If you select "STANDARD" with AV MODE on the remote
control unit, this item will display in gray and not be
selectable. See page 53.
Selected item
High
Mid-High
Mid
Mid-Low
Low
Film mode
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyses it then
recreates each still film frame for high-definition picture
quality.
1
Press MENU.
2
Press a/b to select "Picture", and then press
ENTER.
3
Press a/b to select "Advanced", and then press
ENTER.
4
Press a/b to select "Film Mode", and then press
ENTER.
5
Press a/b to select "On", and then press ENTER.
6
Press MENU to exit the menu.
A
• Return to the previous menu by pressing RETURN.
• If you select "STANDARD" with AV MODE on the remote
control unit, or input sources with vertical frequency
50 Hz (e.g. PAL, SECAM etc.), this item will display in
gray and not be selectable. See page 53.
Description
White with Bluish tone
White with Reddish tone
Advertisement
Table of Contents
